Safety and Maintenance

Network Security

CAUTION! NetAlly strongly recommends the following security measures:

  • Set a local access password on your EtherScope nXG Controlled Edition tester to prevent unauthorized access to sensitive test data and network credentials.

  • If you enable direct VNC access on the tester, set a VNC Password as well. VNC connections are unencrypted and should only be used on secure, trusted local networks. Sensitive information may be visible to attackers if VNC is accessed over unsecured or public links.

  • When joining Wi-Fi networks, ensure you use networks protected by WPA2 or higher. Unencrypted networks may expose security and test data to third-party interception. Avoid login or credential entry on untrusted networks.

  • Physically secure your tester when not in use, and restrict access to authorized personnel only. Always keep track of removable peripherals, such as USB drives or SD cards, as these may contain or provide access to sensitive data. Lost or unattended devices and accessories may put your network and credentials at risk.

Hardware Safety

Use only the Adapter provided or Power over Ethernet (PoE) to charge the battery.

Ensure that the Adapter is easily accessible.

Use the proper terminals and cables for all connections.

CAUTION! To avoid possible electric shock or personal injury, follow these guidelines:

  • Do not use the product if it is damaged. Before using the product, inspect the case, and look for cracked or missing plastic.

  • Do not operate the product around explosive gas, vapor, or dust.

  • Do not try to service the product. There are no serviceable parts.

  • Do not replace the battery. There is risk of explosion if the battery is replaced by an incorrect battery type.

  • Dispose of battery packs and electronics in compliance with your institution's disposal instructions.

  • Use as directed. If this product is used in a manner not specified by the manufacturer, the protection provided by the product may be impaired.

Safety Symbols

Warning or Caution: Risk of damage to or destruction of equipment or software.

Warning: Risk of electrical shock.

Not for connection to a public telephone system.

Class 1 Laser Product. Do not look into the laser.

Cleaning

To clean the display, use a lens cleaner and a soft, lint-free cloth.

To clean the case, use a soft cloth that is moist with water or a weak soap.

Scratches on the dark-colored plastic can be removed by lightly scrubbing a 1:2 mixture of toothpaste to water onto the affected surface with a bristled brush.

CAUTION! Do not use solvents or abrasive materials that may damage the product.