Knowledge Base
Filter By
- Updated: September 10, 2025
The LinkSprinter Cable Test option provides basic length and can identify anomalies, such as shorts, opens, and split pairs. You can access this via the...
- Updated: September 8, 2025
NetAlly branded Linksprinters can now be upgraded to version: 3.00.05.0727 This a feature enhancement for ONLY NetAlly branded units, no previous versions. What you will...
- Updated: September 8, 2025
Most phones have a mobile data auto switch. When there is no Internet or a poor Internet connection it will switch over to mobile data....
- Updated: September 10, 2025
There are two ways to configure your LinkSprinter settings. One is via the mobile UI (which has more configuration options) which this article will cover,...
- Updated: September 8, 2025
The following information can also be found in the "Getting Started Guide" that came with your LinkSprinter. ENVIRONMENTAL Operating Temperature and Relative Humidity: 32 degrees...
- Updated: November 25, 2025
🚨 Issue Overview Problem:Users are unable to access Link-Live through AutoTest, even though Ping, TCP, and HTTP tests to Link-Live succeed. Root Cause:This issue is...
- Updated: September 8, 2025
The LinkSprinter can draw power from batteries or Power over Ethernet (PoE). Batteries The LinkSprinter is powered by two AA batteries and can perform about...
- Updated: September 8, 2025
The Serial Number for your product can commonly be found on the product itself or through the product’s user interface. To find your product’s Serial...
- Updated: September 8, 2025
The mobile UI is a graphical web interface that let's you see detailed test results such as VLAN, as well as configure the LinkSprinter. The...
- Updated: September 9, 2025
Your network environment might require going through a proxy to access the Internet.* You also have the ability to white-list our URLs to help connect...
Popular Articles
- Updated: September 10, 2025
To update to the latest software on your AirCheck G3 or your CyberScope Air you must have a valid AllyCare support contract on the device....
3
- Updated: September 8, 2025
Your network environment might require going through a proxy to access the Internet.* You also have the ability to white-list our URLs to help connect...
3
- Updated: September 18, 2025
Applies to AirCheck G3, CyberScope, CyberScope Air, EtherScope nXG (EXG-300), and LinkRunner 10G (LR10G-200) The AirCheck G3, CyberScope, CyberScope Air, EtherScope nXG (EXG-300 models), and...
2
- Updated: September 24, 2025
The following NetAlly products are capable of connecting to a fiber network using the SFP interface. Please note, not all units ship with an SFP...
2
- Updated: September 8, 2025
The LinkRunner G2, LinkRunner AT 3000/4000, and 10G units do not have native WiFi or Bluetooth support. This means if you try to enable either...
2