Resetting LinkRunner 10G Factory Defaults

CAUTION! Resetting your device to factory defaults can delete all test results, user-installed applications, testing app settings, and saved files.

1. Make sure to back up any files you wish to keep before resetting.

2. Open the system Device Settings by tapping the Settings icon at the bottom of the Home Screen.

3. On the Settings screen, scroll down to and tap on the System section.

4. On the System screen, tap Reset options.
   

5. On the Reset options screen, select an option based on the defaults you want to reset. Your LR 10G displays a list of the items that will be reset based on the option and a confirmation button.

   Reset Wi-Fi, mobile & Bluetooth: resets all network settings for Wi-Fi (test and management), mobile data, and Bluetooth.

   Reset app preferences: resets any preferences or settings for applications, although app data is not lost.

   Erase all data (factory reset):

   CAUTION! Erases all user data from your tester's internal storage, including: system and app data and settings; downloaded apps; test profiles; credentials; packet information; and screen captures.

6. Tap the confirmation button to begin the reset.

7. Your unit may ask you to confirm again before resetting. If so, tap the final confirmation button to reset your LR 10G's defaults. The unit then restarts with the factory default settings you selected.

8. Data on removable drives is not included in the reset. To be thorough, you may also want to use the Files application to delete any application settings, preferences, or other data that you have saved on an attached Micro SD card or a USB thumb drive. (Do not delete your backup files.)