Running Nmap Tests

The Nmap Runner runs tests, lets you edit run settings, and lets you upload results.

1. Begin on the main Nmap Tests screen, and tap the test you want to run. This opens the Nmap Test parameter screen, which lets you edit the parameters for the test.

2. When you have changed any parameters that you want, tap TEST to open the Runner screen.

3. To adjust the run settings for this specific test (such as specifying a target if the test requires a target), tap the settings icon to open the Nmap Runner Settings screen. When you have finished, tap the system Back icon to return to the main Runner screen.

4. Tap START. This runs the test with the parameters and settings that you have chosen.

5. (Optional) Tap the action overflow icon , and then select Upload to Link-Live to upload the test results to the Link-Live cloud service.

   

   1. Enter a comment about the test in the Comment field.

   2. Enter a more specific information about the project or results in the Job Comment field.

   3. Tap UPLOAD TO LINK-LIVE.

NOTE: The Next icon in the screen header automatically scrolls to between green, yellow, or red highlighted text in the Nmap Output.