Factory Default EZ Profile

Your LinkRunner 10G begins with a default version of the wired profile. This designated EZ profile is always used in the EZ Wired App app to connect and measure the designated link.

To customize an individual Profile with the required network settings, tap the settings icon on that profile's individual test card screen, shown below.

By default, the EZ Wired Profile runs automatically whenever a wired link becomes active on the top RJ-45 if no other apps are currently using the test port. See When EZ Wired Profile Connects Automatically for details.

NOTE: The default Wired Profile does not run automatically over a fiber link. You must tap START in AutoTest to run a Wired Profile on a fiber connection.

Related Topics

AutoTest Settings and Profile Groups

Adding and Configuring Profiles

EZ Wired App