The Discovery application creates an inventory of the devices on your networks along with their attributes: device types, names, addresses, interfaces, VLANs, resources, and other connected or associated devices. The app allows you to identify and analyze network devices and acts as a jumping-off point for further analysis using other apps, such as Nmap, Path Analysis, and connection tests.
Devices are discovered in the local broadcast domains where the LinkRunner 100G is physically connected. By default, discovery processes run out of both test and management ports.
Discovery uses Ethernet and fiber to find, classify, and display the details of network components. Information provided by Discovery can include the following:
- IP, BSSID, and MAC addresses
- Device Names
- Device Connectivity
- SNMP Data
- Network Problems
- Interface Details and Statistics
- Results of Nmap tests
Devices are discovered via ARP and Ping sweeps; SNMP, DNS, mDNS, and netBIOS queries; and passive traffic monitoring. Discovery classifies each device as it is found. Up to 2,000 devices can be reported.
The main Discovery screen lists all the devices the LinkRunner 100G has discovered.

From the main Discovery screen, you can filter and sort the listed devices, open the left side navigation drawer to configure settings, and tap a device’s card to view its details.

Each of the Details screens show additional information about the selected device, any Problems detected by the LinkRunner 100G, and counts for other connected or corresponding network elements.
Tap any of the device cards on the main Discovery list screen to view Device Details.
The example below calls out a Router card and its Details screen.
