There are three types of AirMapper Surveys, which can be exported to AirMagnet Survey Pro: Passive, Active using the WiFi Test adapter, Active using the 1×1 Management port adapter. The AirCheck G2 supports Passive and Active Surveys. The EtherScope nXG supports Passive, Active using the WiFi Test adapter and Active using the 1×1 Management port adapter.
In AirMagnet Survey Pro, these surveys will be represented as follows:
| Type | Icon | Adapter Name |
| Passive Survey |  |
AirMapper |
| Active Survey |  |
AirMapper |
| AirMapper Management Port Active |  |
AirMapper |
In AirMagnet Survey Pro, these are the available heatmaps by AirMapper Survey Type:
| Heatmap | Passive | Active | Management Port Active |
| Signal Strength | yes | yes | yes |
| Noise Level | yes | yes | n/a |
| Signal/Noise Ratio (SNR) | yes | yes | n/a |
| Channel Interference | yes | yes | n/a |
| Predictive PHY Data Rate Down | yes | n/a | n/a |
| 802.11n | yes | n/a | n/a |
| 802.11ac | yes | n/a | n/a |
| 802.11ax | yes | n/a | n/a |
| Channel Overlap 802.11ac | yes | n/a | n/a |
| Measured PHY Data Rate Up | n/a | yes | yes |
| AP Operating Mode | yes | n/a | yes |
| Channel Width | yes | n/a | yes |
| Retry | n/a | yes | n/a |