You can remotely access your EtherScope nXG using a VNC client connection. While VNC can be established over Wired or Wi-Fi Test Ports, using the Management Ports provides the most stable connection.
Find Your EtherScope nXG IP Address
The quickest way to locate the assigned IP address is through top notifications:
- Swipe down from the Status Bar to view IP details.
Configure EtherScope nXG for VNC Access
Follow these steps to enable VNC remote access:
1. Access General Settings from the menu bar in any NetAlly application.
.
2. Tap VNC to open the VNC settings screen.
- Wired Management Port: Plug an Ethernet cable with an active network connection into the left-side RJ-45 Management Port.
- Wi-Fi Management Port: Configure the main Android Wi-Fi settings to connect to a wireless network.
3. Configure VNC settings:
- Allow VNC Connections: Toggle to enable or disable remote access.
- Port Number: Enter a custom port if needed.
- Password: Set a password for secure VNC access.
- Web Viewer: Toggle to enable or disable browser-based access.
- Web Viewer Port: Enter a custom port if required.
Connect to EtherScope nXG via VNC Client
- Install a VNC application on your PC (e.g., TightVNC).
- Get the IP address of the desired management port.
- Enter the IP address in the VNC client and connect.
4. If prompted, enter the password configured in VNC settings.