The following NetAlly products are capable of connecting to a fiber network using the SFP interface. Please note, not all units ship with an SFP adapter so it might need to be purchased separately.
- LinkRunner AT 2000 (not available on the 1000)
- Verify the SFP by selecting Tools, then LinkRunner Information.
- LinkRunner G2
- Verify the SFP by selecting About from the left-side navigation drawer in the LinkRunner G2 app.
- OneTouch AT G2
- Verify the SFP from the Home screen by tapping OneTouch AT icon (bottom middle) and scrolling down to SFP info.
- OneTouch AT 10G (capable of 10G fiber)
- Verify the SFP from the Home screen by tapping OneTouch AT icon (bottom middle) and scrolling down to SFP info.
- EtherScope nXG and LinkRunner 10G (capable of 10G fiber)
- Verify the SFP by selecting About from the left-side navigation drawer in EtherScope nXG / LinkRunner 10G apps.
- CyberScope (capable of 10G fiber)
- Verify the SFP by selecting About from the left-side navigation drawer in CyberScope apps.
- LinkRunner AT 4000 (capable of 100MB/1G fiber – not available on the LRAT-3000)
- Verify the SFP by selecting About from the left-side navigation drawer in LinkRunner AT 3000/4000 apps.
The following SFP modules are supported and some are available as additional accessories from NetAlly. Keep in mind it is possible to use other SFPs outside of the ones listed below (unless you are using 100mb fiber, as we only support this model). Make sure that you are using the same SFP type at both ends. For example, If you are using a 1000BASE-SX SFP in your switch port then you must use a 1000BASE-SX SFP in the LinkRunner AT-2000.
Note that any standards-based, DDM SFP (which is most these days) will work with our power meter function in EtherScope, LR10G and CyberScope. If they have the SFP for the various wavelengths we should work with them, no problem. This also includes DAC-type twinax cables (Direct Attach Copper).
| NetAlly Part# | MFG Model No. | Description | Supported Cable Type | Fiber Optic Cable Color | NetAlly Compatible Units | Photo |
| SFP-1000SX | AVAGO AFBR 5715ALZ | SX Gig Fiber SFP transceiver with DDM (850 nm, Multimode) | 50/125 μm Multimode Fiber 550 M62.5/125 μm Multimode Fiber 275 M | Multimode (50/125) (OM2) – OrangeMultimode (50/125) (OM3, OM4) – Aqua (10G Optimized)
Multimode (50/125) (OM5) – Lime Green Multimode (62.5/125) (OM1) Grey (Sometimes Orange) |
LinkRunner AT-2000 LinkRunner G2 Etherscope nXG LinkRunner 10G CyberScope LinkRunner AT 3000 LinkRunner AT 4000 |
 |
| SFP-1000LX | Finisar FTLF1318P2BTL | LX Gig Fiber SFP transceiver with DDM (1310 nm, Singlemode) | 9/125 μm Singlemode Fiber 10 km | Singlemode (9/125) (OS1/OS2) – Yellow | LinkRunner AT-2000 LinkRunner G2 Etherscope nXG LinkRunner 10G CyberScope LinkRunner AT 3000 LinkRunner AT 4000 |
 |
| SFP-1000ZX | Finisar FTL1518P1BTL | ZX Gig Fiber SFP transceiver with DDM (1550 nm, Singlemode) | 9/125 μm Singlemode Fiber 80 km | Singlemode (9/125) (OS1/OS2) – Yellow | LinkRunner AT-2000 LinkRunner G2 Etherscope nXG LinkRunner 10G CyberScope LinkRunner AT 3000 LinkRunner AT 4000 |
 |
| SFP-100FX | Avago 57E5APZ | 100BASE-FX Fiber SFP transceiver with DDM (Multimode) | 50/125 μm Multimode Fiber 550 M62.5/125 μm Multimode Fiber 275 M | Multimode (50/125) (OM2) – OrangeMultimode (50/125) (OM3, OM4) – Aqua (10G Optimized)
Multimode (50/125) (OM5) – Lime Green Multimode (62.5/125) (OM1) Grey (Sometimes Orange) |
LinkRunner AT-2000 LinkRunner G2 LinkRunner AT-3000 |
 |
| SFP+MR-10G1310 | 10GBase-LR/10GBase-LX | LX/LR, 1G/10G, 1310nm, Singlemode | Singlemode (9/125) (OS1/OS2) – Yellow | Etherscope nXG LinkRunner 10G CyberScope |
 |
|
| SFP+MR-10G850 | 10GBase-LR/10GBase-LX | SX/SR, 1G/10G, 850nm, Multimode | Multimode (50/125) (OM2) – OrangeMultimode (50/125) (O |