Knowledge Base
Filter By
- Updated: September 5, 2025
The 1Gbps Wired Performance Test is used to ensure that newly installed or upgraded wired networks meet SLA objectives and are ready for new high-bandwidth...
- Updated: September 5, 2025
Certificate Requirements: When importing a certificate to the tester, the certificate must meet with the following requirements: The certificate must contain the private key. It...
- Updated: September 5, 2025
The OneTouch AT provides 802.1x authentication for both (LAN/WLAN). The idea behind 802.1x authentication is to prevent rogue devices from connecting to your LAN....
- Updated: September 8, 2025
The two most popular EAP Types are PEAP-MSCHAPv2 for UserName and Password Authentication and EAP-TLS for certificate-based authentication. Extended Authentication Protocol (EAP) is an authentication...
- Updated: September 8, 2025
To access your LinkRunner G2 from your Internet browser do the following: 1. From the home screen, select File manager, then Access from PC....
- Updated: September 17, 2025
OneTouch AT has a few options which may be enabled: Wired, Wi-Fi, Capture, Advanced Testing, and GB/T 21671. To access these options, from Home, go...
- Updated: January 8, 2026
The AirCheck G2 has two USB Type A ports on the right side of the test unit. The bottom one (Port #1) is fully USB...
- Updated: September 8, 2025
Some NEW functionality will be available on the AirCheck G3: • Report illegal devices and channels on2.4/5/6GHz bands, added a new color for illegal channels...
- Updated: January 8, 2026
This article describes the upgrade process for AirMagnet WiFi Analyzer Pro. All upgrades should be performed as a complete uninstall/reinstall of the application....
- Updated: September 8, 2025
AM Survey: AirMapper Viewing and Analyzing AirMapper Data within AirMagnet Survey Pro Starting with Survey v10.0, you can perform a survey with the AirMapper application...
Popular Articles
- Updated: January 8, 2026
To update to the latest software on your AirCheck G3 or your CyberScope Air you must have a valid AllyCare support contract on the device....
4
- Updated: January 12, 2026
Your network environment might require going through a proxy to access the Internet.* You also have the ability to white-list our URLs to help connect...
3
- Updated: September 18, 2025
Applies to AirCheck G3, CyberScope, CyberScope Air, EtherScope nXG (EXG-300), and LinkRunner 10G (LR10G-200) The AirCheck G3, CyberScope, CyberScope Air, EtherScope nXG (EXG-300 models), and...
2
- Updated: September 24, 2025
The following NetAlly products are capable of connecting to a fiber network using the SFP interface. Please note, not all units ship with an SFP...
2
- Updated: January 15, 2026
The LinkRunner G2, LinkRunner AT 3000/4000, and 10G units do not have native WiFi or Bluetooth support. This means if you try to enable either...
2