Tech Tips
Filter
Topics
Resources
Share
Subscribe to Tech Tips
Topics
Shopping for a Network Tester? Six Important Considerations
Hard to believe, but there are vendors out there calling their product a “network tester” when it can’t even link.
Downloading AirMapper Floor Plans from Link-Live
The floor plan(s) can be sent to any of the AirCheck G2 or EtherScope nXG units in the user’s organization.
AirMapper Tips – Preparing Your Floor Plan
AirMapper™ on the AirCheck G2 or EtherScope nXG provides a quick and easy way to map out your Wi-Fi network. Allowing you to collect empirical
Extending the Battery Life of an AirCheck G2
An easy way to extend the battery life of an AirCheck G2 by more than nine hours without having to spend time re-charging the internal battery or swapping batteries is by using an external battery pack like the XTPower MP-10000.
Remote Troubleshooting for Today’s Environment
During this pandemic, with so many users working remotely, many challenges of remote site troubleshooting arise, such as: • Lack of expertise at the remote
Terminated vs Unterminated Cables Tests
Learn the benefits of terminated versus unterminated cables tests using the LinkRunner G2, LinkRunner 10G, or the EtherScope nXG.
Accessorize Your NetAlly Tools
With Bluetooth support built into the EtherScope™ nXG and the addition of the Edimax Wi-Fi/Bluetooth adapter on the LinkRunner™ G2, you can add a number
EtherScope nXG Fast Discovery
EtherScope nXG helps you to know your network in under 1 minute.
Understanding PoE Terminology
Power over Ethernet (PoE) is a technology that enables Ethernet cables to carry electrical power to devices such as Wi-Fi access points, IP cameras, VoIP phones, signage, and other networked devices along with data
PING Usage and Limitations
Ping is a protocol used to verify device availability, response time, and packet loss in a network by sending ICMP (Internet Control Messaging Protocol) Echo Request frames to an end network device and listening for the Echo Reply frames from the device. In other words, if the end device receives and returns the Ping, then you have connectivity to the device.