Tech Tips

View All Posts

Extending the Battery Life of an AirCheck G2

An easy way to extend the battery life of an AirCheck G2 by more than nine hours without having to spend time re-charging the internal battery or swapping batteries is by using an external battery pack like the XTPower MP-10000.

Troubleshooting Wi-Fi Connection Problems

These are very common complaints, and all of them concerning since figuring out the root cause of these common wireless network problems can be very time consuming and sometimes difficult.

EtherScope® nXG Periodic AutoTest

Using the Periodic AutoTest feature of the EtherScope® nXG and the LinkRunner® 10G allows you to deploy the analyzer out to the problem location and monitor network resources over a period of time. Once you know exactly what is having problems and when it is having problems, it makes it much easy to get to the root of the problem.

802.11 Retries, what do they mean?

The RF and Traffic Statistics section of the EtherScope™ nXG provides a per-channel view of the key Wi-Fi statistics. Included in this is a graphical representation of the precent of retries observed by the EtherScope® nXG. The graph above shows the retries when running an iPerf test between an AirCheck™ G2 and a Test Accessory.

Link Layer Discovery Protocol

The Link Layer Discovery Protocol (LLDP) is a vendor-neutral protocol that is used to advertise capabilities and information about the device.  Every one of the

Roaming Test with the AirCheck™ G2

Good wireless doesn’t just happen. Using tools such as the Roaming Test on the NetAlly AirCheck™ G2 helps you ensure you are providing the Wi-Fi coverage required by your organization.

Roaming Test with the AirCheck™ G2

Good wireless doesn’t just happen. Using tools such as the Roaming Test on the NetAlly AirCheck™ G2 helps you ensure you are providing the Wi-Fi coverage required by your organization.

Read More »

AirCheck G2™ Wireless Management Port

There are times when it is necessary to ship the AirCheck G2 out to a remote site to troubleshoot a wireless issue. By connecting the wired port on the side of the AirCheck G2 to the network and putting the unit into remote mode, it can be controlled using VNC. An even better configuration is to setup the AirCheck G2 to be remotely controlled wirelessly.

Read More »

PoE Issues… How to Find and Avoid Common Problems

Today, PoE is powering many mission-critical devices, including VoIP systems, Wi-Fi networks, surveillance systems, digital lighting, building access, IoT devices, digital signage, etc. As with bandwidth, PoE has also increased, evolving from 12W to 25W.

Read More »
This website stores data such as cookies to enable essential site functionality, as well as marketing, personalization, and analytics.

Contact Technical Support

  • Max. file size: 256 MB.

Contact Customer Service